![]() ![]() Somfy support teams do not handle network configurations. The prior information is to be shared with a network administrator. When the shade LED flashes green, release the button. The list of ports to open to these servers are :ġ23 TCP / UDP - 178.32.15.249 : NTP port: date and time synchronizationġ8888 UDP - 54.39.91.5 : Regularly check the connection to the serverĨ02 and 803 TCP - 54.39.91.5 : Permanent TCP connection with TLS encryptionĤ43 TCP - 54.39.91.5 and 178.32.15.250 : HTTPS port to transfer data securely with Overkiz servers On one of your shades, press and hold the program button for 3 seconds. It must be able to resolve all the DNS names of the "." domain via a DNS server. The TaHoma Gateway uses DHCP protocol for the network configuration. This may not be the case for some Internet Access Points such as ISP Modem/Routers, commercially managed networks, 3G/4G phones, and APs by satellite. In most networks, dynamic firewalls, or NAT gateways in their default configuration comply with these requirements. Lutron QS Standalone (NWK) Driver for Shade and Shade Group (Better) MSRP: 125.00. Ability to ‘encapsulate’ and enhance any third-party blind driver which currently supports only Up/Down. ![]() Enhanced control of any motorized shade controlled by two or three relays (Up, Down, Stop). Some security settings can block the communication of the gateway to the TaHoma server. Ksenia Auxi HT blind driver for lares 4.0 in Control4 systems. Specifically, this driver set provides one or more of the following functions: Enhanced control of any motorized shade connected to a Bond Bridge. Shade scenes are used to set predefined levels for multiple shade motors when recalled. The SHADES screen also provides master raise and lower controls for programmed shade motors or groups in the room. In some instances, the TaHoma requires changes to the user’s network. Use the SHADES screen to recall shade scenes for the room where the TSR-310 is paired or for the whole house. ![]()
0 Comments
Leave a Reply. |